ご質問ありがとうございます。
(1) ifconfigの実行結果については以下のとおりです。なお、CANDY Pi Lite経由でモバイルネットワークに接続した場合は、USB接続であれGPIO接続であれ常にネットワークインタフェースとしてはppp0
と認識されます。モバイルネットワークに接続していない状態では、ppp0は表示されません。
以下の例は、有線LANを接続した状態で、モバイルネットワークに接続した場合の結果となります。一部値を変更して出しています。
# ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.xxx.xxx netmask 255.255.xxx.xxx broadcast 192.168.xxx.xxx
inet6 xxxx::xxxx:xxxx:xxxx:xxxx prefixlen 64 scopeid 0x0<global>
inet6 xxxx::xxxx:xxxx:xxxx:xxxx prefixlen 64 scopeid 0x20<link>
ether xx:xx:xx:xx:xx:xx txqueuelen 1000 (Ethernet)
RX packets 104089 bytes 51339884 (48.9 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 92881 bytes 33400791 (31.8 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 17937 bytes 15558143 (14.8 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 17937 bytes 15558143 (14.8 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
ppp0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500
inet xxx.xxx.xxx.xxx netmask xxx.xxx.xxx.xxx destination xxx.xxx.xxx.xxx
ppp txqueuelen 3 (Point-to-Point Protocol)
RX packets 4 bytes 52 (52.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 4 bytes 58 (58.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
(2) 帯域が最も大きい機種はご指摘のとおりCANDY Pi Lite+シリーズ(+D、+K、マルチキャリア)となります。詳細情報については以下をご覧ください。
https://candy-line.com/portfolio/candy-pi-lite-plus/